$99.99

Complete fabricated rear engine mount now available with 70, 88 or 95 durometer Energy Suspension urethane bushing,

Application

2004 - 2016 Mazda 3 [ 2.0 and 2.3 and 2.5 engine ]

2004 - 2016 Mazdaspeed3

2006-2010 Mazda 5

Improves drive line response by inhibiting driveling lash, putting all that motion to the task of moving the car along. Now fabricated from .125 steel plate, we weld in strengthening pieces and then powder coat the metal gloss black. We then install the ENERGY SUSPENSION urethane bushings. The 70 durometer bushings which are recommended for the street. The 88 durometer bushings are for aggressive street and racing activities.  They may cause an undesirable resonance in the car at idle speeds but should not interfere with normal driving characteristics. The 95 durometer bushings would be for racing purpose only. For daily driving and normal street applications, order the mounts with the 70 durometer bushings. 

The Urethane bushings are replaceable for instances where the bushing finally gives out or you feel the need for a harder or softer bushing. Which allows you to just change the bushing and not the whole mount again keeping the cost down.

Lifetime warranty on the steel fabricated mount. 

Current Stock:
SKU:
MZAWR70
Weight:
6.00 LBS
Width:
9.00 (in)
Height:
5.00 (in)
Depth:
3.00 (in)
Warranty:
AWR believes so strongly in their engine mounts and sway bars that they back them with a limited Lifetime Warranty. What's more, this warranty, excluding bushings, is retroactive to all mounts and sway bars built previously by AWR. Basically, if it breaks or fails, AWR will fix or replace it at their discretion. The warranty is 'limited' in that bushings are considered a normal wear item, so the urethane or rubber bushings are not covered, but if the metal cracks, breaks or otherwise fails, we'll replace or repair it.
Shipping Cost:
Calculated at Checkout
Durometer *

Reviews Hide Reviews

Solid product

This was a very easy install and coupled with the passenger side motor mount is a great upgrade for the suspension of the Mazda 3.

Best product ever

This is exactly what every mazda3 owner needs to get period. It resolves lag,wheele hop and every other issue you may have. Thanks again for a perfect product.

Love the new mount from AWR.

I love this mount it feels great. If your looking to upgrade your speed3 then this mount is where you start for sure. My car feels smooth at higher rpms and a little rough at idle but not as annoying as I thought it would be. Definatly going to need a new clutch soon my car has 74000 miles and this mount takes away from like 80% to 90% of the movement front to back so when the clutch engagues its a little more harsh than stock so when you race it wears the stock clutch a little more.

Great Mount for the price

For $90 you really can't go wrong with this product. The quality of the finished product looks and feels great. It feels/looks like it will last for a long time. It also looks almost exactly the same as the OEM mount, so a dealer probably won't even notice you've changed the mount to an aftermarket. ;) Anyone with a minor amount of mechanical knowledge can install this upgrade. It took me less than 15 minutes to swap out the old motor mount. Initial impressions are good. Shifting feels great and solid. The clutch grabs immediately and the car moves, no more "lurching" with this mount. The vibrations were noticeable at idle and during initial movement in 1st gear, but have subsided TREMENDOUSLY in the 250 miles I've put on this mount. This is one of the best upgrades to any car I've done for the price. My next purchase will be a short throw shifter to compliment the clean, crisp shifts that my 2004 Mazda 3s 5-door gives me now!

Mazda 3 engine mounts

First of all the customer service was great. The quality was just as stated on the site. These mounts give a tight solid shift and pick up. NO MORE WHEEL HOP. NONE!! Thanks ab