Bushing - Engine Mount Replacement - 1.5inch

(7 reviews) Write a Review
2.00 LBS
$8.00 (Fixed Shipping Cost)

Product Overview

These bushings are the smaller style [ 1 1/2 barrel ] replacement urethane bushings for our fabricated motor mounts. Motor mount bushings are available in three durometer specs. Sold in set of 2. 2 bushings required per motor mount. Typically we sell the 95 durometer [ hard ] bushings for the Manual transmissions cars for road race and drag purposes primarily. The 88 durometer [ medium ] bushings for the street and occasional track for either transmission. 70 Durometer is the Softest but still stiffer than original OEM mounts. Application chart for this style bushing 1992 - 1994 MX-3 front by radiator and rear by the firewall. 1990 - 1994 Protege front by radiator and rear by the firewall. 1986 - 1991 RX-7, 1995 - 2003 Protege front by radiator and rear by the firewall. 1988 - 1999 MX-6 and Ford Probe same as above. 2003 - 2009 Mazda6 [ non speed 6 ] transmission mounts. 2003 - 2007 speed 6 lower rear mount [ requires 2 sets ]2003 - 2009 Mazda3 or Speed 3 lower rear [ 88 D only ]. Please specify application upon ordering these items!


(7 reviews) Write a Review

7 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Dwayne Adams on 11th Oct 2021

    Excellent service, bushings arrived trimmed for a perfect fit.

  • 5
    Great product Motor Mount!

    Posted by F15ms6 on 9th Nov 2017

    I have owned my AWR rear motor mount for over 2 years, the bushings are durable and the 88 duro is the perfect of both worlds. Its solid enough but not harsh. The best part is that the motor mount is service, bushings can be replaced easily.

  • 5

    Posted by zachary magnutz on 9th May 2017

    The ability to swap out bushings whether for changing duro or like where you've had the mount in for so long it starts to wear out. Just swap out and back in action for 15 bucks!!!! YESSSSS!

  • 5
    70 Durometer Bushings

    Posted by Unknown on 16th Jan 2017

    These are great quality bushings and they were super easy to install thanks to the 2 piece design of the motor mounts. Would buy again, no doubt about it.

  • 5
    Mazda 6s dog bone/lower trans mount

    Posted by Eddrick Boddie on 20th Dec 2016

    I'm jumping the gun on this one but I bought the 88 duro lower trans mount about 5 years ago and it held up for almost 100000 miles of hard abuse. The bushings just started ripping this month, noticed when I changed my oil. Thanks again guys! Ed

  • 4
    AWR 70 Durabond Polyurethane RMM Insert

    Posted by Unknown on 22nd Jun 2014

    My car is a 2008 Mazda 3s (2.3L)sedan with 5-speed manual transmission. Lowered with Koni STR.T (orange) shocks and struts combined with H&R lowering springs. After installing the AWR 70 durabond poly inserts into the RMM (rear motor mount) the car has decreased wheel hop, less vibration while under load and decreased (almost non-existent now) the jerking motion when decelerating.

  • 5

    Posted by Andrew H on 31st Dec 2013

    Have your bushings worn out? Get these! Recommended to install with the mount out of the car. After installing these bushings my life has completely changed, for the better. My wife loves me more, the children call me "dad" again, even the dog can stand to be around me.I think it even cleared up the presistent toe fungus. Angels sing and baby kitten don't die anymore. They are replacement bushings, they get 5 stars for fitting in AWRs mount. I bought a used MS6 rear motor mount with blown bushings. The old ones came out and the new ones went in without any problems. I got the 88 duros so they would last a little longer. What else can I say? Oh, and FIRST to review, woot woot!