Product Overview

This kit comes with two replacement bushings to fit in one engine mount.

These bushings are the 1.5 inch barrel style which are red in color. AWR's replacement Energy Suspension polyurethane bushings are for AWR's fabricated motor mounts. Motor mount bushings are available in three durometer specifications. 2 bushings are required per motor mount, this specific kit provides two replacement bushings to complete replacements on 1 mount.

70 durometer is recommended for daily driving with little to no mods. 70 - 88 durometer is recommended for lightly to intermediate modification levels. 88 - 95 durometer is recommended for highly modified street and track builds.

70 durometer (soft)
88 durometer (medium)
95 durometer (hard)

Please specify which mounts these bushings are for. Some may need a slight trim and we would prefer to do that service here at no charge!

Have any questions? Email ali@awrracing.com or use our live chat located on our website!

How to swap bushings:

1. This process is best performed in a bench vise. Drive the center steel sleeve out with a punch and rubber mallet.

2. Insert flat blade screwdriver into urethane bushing and line up where the two bushings meet in the middle. Drive out one side of the bushing. Once one side is complete, drive out the remaining side.

3. Insert new bushings by hand as far as they will go. Pinch in vise to set against the barrel. Insert opposite side and repeat.

4. Insert metal sleeve and pinch in vise or use a rubber mallet to seat. Do not hit the sleeve with a steel hammer!

Reviews

(9 reviews) Write a Review

9 Reviews Hide Reviews Show Reviews

4
Bushing

Posted by Chris on 5th Mar 2023

Hell of a mount.
5
Very stiff but great for track.

Posted by Mitchel Y. on 19th Oct 2022

Bought these to swap out from the softer duro bushings. These helped out tremendously with my shifting as everything is staying in line now.
5
Bushings

Posted by Dwayne Adams on 11th Oct 2021

Excellent service, bushings arrived trimmed for a perfect fit.
5
Great product Motor Mount!

Posted by F15ms6 on 9th Nov 2017

I have owned my AWR rear motor mount for over 2 years, the bushings are durable and the 88 duro is the perfect of both worlds. Its solid enough but not harsh. The best part is that the motor mount is service, bushings can be replaced easily.
5
Fantastic!

Posted by zachary magnutz on 9th May 2017

The ability to swap out bushings whether for changing duro or like where you've had the mount in for so long it starts to wear out. Just swap out and back in action for 15 bucks!!!! YESSSSS!
5
70 Durometer Bushings

Posted by Unknown on 16th Jan 2017

These are great quality bushings and they were super easy to install thanks to the 2 piece design of the motor mounts. Would buy again, no doubt about it.
5
Mazda 6s dog bone/lower trans mount

Posted by Eddrick Boddie on 20th Dec 2016

I'm jumping the gun on this one but I bought the 88 duro lower trans mount about 5 years ago and it held up for almost 100000 miles of hard abuse. The bushings just started ripping this month, noticed when I changed my oil. Thanks again guys! Ed
4
AWR 70 Durabond Polyurethane RMM Insert

Posted by Unknown on 22nd Jun 2014

My car is a 2008 Mazda 3s (2.3L)sedan with 5-speed manual transmission. Lowered with Koni STR.T (orange) shocks and struts combined with H&R lowering springs. After installing the AWR 70 durabond poly inserts into the RMM (rear motor mount) the car has decreased wheel hop, less vibration while under load and decreased (almost non-existent now) the jerking motion when decelerating.
5
Bushings!!!

Posted by Andrew H on 31st Dec 2013

Have your bushings worn out? Get these! Recommended to install with the mount out of the car. After installing these bushings my life has completely changed, for the better. My wife loves me more, the children call me "dad" again, even the dog can stand to be around me.I think it even cleared up the presistent toe fungus. Angels sing and baby kitten don't die anymore. They are replacement bushings, they get 5 stars for fitting in AWRs mount. I bought a used MS6 rear motor mount with blown bushings. The old ones came out and the new ones went in without any problems. I got the 88 duros so they would last a little longer. What else can I say? Oh, and FIRST to review, woot woot!