2004-2016 Mazda 3 rear motor mount

(25 reviews) Write a Review
6.00 LBS
Calculated at Checkout

Product Overview

Complete fabricated rear engine mount now available with  62, 70, 88 or 95 durometer Energy Suspension urethane bushing,


2004 - 2016 Mazda 3 [ 2.0 and 2.3 and 2.5 engine ]

2004 - 2013 Mazdaspeed3 (62 durometer is not applicable for MS3)

2006-2010 Mazda 5

Improves drive line response by inhibiting driveling lash, putting all that motion to the task of moving the car along. Now fabricated from .125 steel plate, we weld in strengthening pieces and then powder coat the metal gloss black. We then install the ENERGY SUSPENSION urethane bushings. The 70 durometer bushings which are recommended for the street. The 88 durometer bushings are for aggressive street and racing activities.  They may cause an undesirable resonance in the car at idle speeds but should not interfere with normal driving characteristics. The 95 durometer bushings would be for racing purpose only. For daily driving and normal street applications, order the mounts with the 70 durometer bushings. 

The Urethane bushings are replaceable for instances where the bushing finally gives out or you feel the need for a harder or softer bushing. Which allows you to just change the bushing and not the whole mount again keeping the cost down.

Lifetime warranty on the steel fabricated mount. 

Powder coated black, red, and silver got that very durable finish.


62 - 70 durometer is recommended for daily driving with little to no mods. 70 - 88 durometer is recommended for lightly to intermediate modification levels. 88 - 95 durometer is recommended for highly modified street and track builds. Don't forget- you can always opt for a different durometer if your first choice doesn't suit you needs, all of our bushings can be replaced!

62 durometer (ultra soft)

70 durometer (soft)

88 durometer (medium)

95 durometer (hard) 

Warranty Information

AWR believes so strongly in their engine mounts and sway bars that they back them with a limited Lifetime Warranty. What's more, this warranty, excluding bushings, is retroactive to all mounts and sway bars built previously by AWR. Basically, if it breaks or fails, AWR will fix or replace it at their discretion. The warranty is 'limited' in that bushings are considered a normal wear item, so the urethane or rubber bushings are not covered, but if the metal cracks, breaks or otherwise fails, we'll replace or repair it.


(25 reviews) Write a Review

25 Reviews Hide Reviews Show Reviews

  • 4
    2004-2016 MAZDA 3 REAR MOTOR MOUNT

    Posted by Robert on 30th Apr 2021

    Well made product, with excellent customer service. The color I wanted was out of stock, and I was promptly emailed regarding the delay. The included hardware is also top quality. -1 star for lack of installation instructions/torque specifications. I had to consult the installation instructions for a competitor's product. I ordered the 70a, and the increase in vibration at idle is very noticeable, but not quite severe enough to be obnoxious. The factory mount is a very weak design, and this solid mount is an excellent upgrade.

  • 5
    Rear mount

    Posted by Fort Myers guy on 13th Apr 2021

    Excellent quality. Much beefier design and provides zero movement compared to stock mount.

  • 5

    Posted by Justin on 28th Mar 2021

    Installed this on my 2008 2.0L 1300km ago. I got the 70 durometer bushings. After instal there was some vibrations at idle and with the ac on. 1300km later they subsided slightly but are still there. Perfectly fine if you are an enthusiast and like to feel of a stiffened motor. If you like soft and cushy this isn't the durometer to go for at least in a 2.0L as there is no balance shaft. Highly recommend this mount as it adds so much pleasure to the driving experience.

  • 5
    Mazda 3 Rear Motor Mount 70 Durometer

    Posted by T. E. on 24th Dec 2020

    Opted for the 70 Durometer mount for daily driving and it made an unbelievably great difference in how the car shifts and drives. No more lurching from 1st to second gear, much smoother shifts. A little bit of vibration at idle but it is very minimal, and I do not even notice it anymore. Mount is very well made and the read finish looks great. Only took about 30 minutes to install. Highly recommended-if I had to start over I would order one again in a heartbeat.

  • 5
    Great product!

    Posted by Aiden Masterson on 23rd Oct 2020

    Just installed the rear motor Mount and have about 150 miles on it and instantly I noticed a big difference, great quality product and the guys who work here are amazing! 10/10 would recommend

  • 5
    Excellent Rear Motor Mount

    Posted by Matthew on 15th Oct 2020

    Installed easily in my 2013 Mazda 3 with the Skyactiv 2.0L and 6 speed Skyactiv trans. This part was orders of magnitude sturdier than the cheap one I bought from Amazon. Does add some more vibration at idle but smoothed out considerably after the first few hundred miles. Car shifts better and seems tighter than before. (also replaced the other two mounts with OEM parts.) Highly recommended.

  • 5

    Posted by Jon on 12th Oct 2020

    My old rear motor mount was destroyed and I decided to replace it with the 70 durometer. It straight up transformed my car, I was smiling on the test drive. The engine isn't going anywhere and feels very firm. It does vibrate a bit on idle and when the AC is on it's pretty noticeable but I can live with it. It should vibrate less after it some miles. Would definitely recommend these over OEM style mounts.

  • 5
    Great company

    Posted by jj on 21st Sep 2020

    Fount AWR through instagram and was very impressed by the account. Ordered this mount and got a email that it shipped same day which is very rare when I order car parts. Pleased with the packaging and got two stickers which was awesome. Took about 30 minutes to install and it is way better than my previous cobb mount and the pricing is so much better. Who ever runs the social media for this company is doing a fantastic job and I am definitely gonna buy more products for my speed in the future.

  • 5

    Posted by Elijah on 17th Aug 2020

    I got this mount because it was cheaper than all the other ones I was looking at and I was completely shocked.. the quality of the mount is amazing and it was the easiest install of a mod i have ever done in my life and I have had lots of cars ever since I got my license about 15 years ago. Powder coat is honestly great as well, suoer durable. Im gonna tell my buddies at the car meet this week about it because its definitely great improvement on my 2008 hatchback Mazda3. Thanks Awr and Tony with the good customer service. Mount shipped same day and was delivered two days from order date